Causes and consequences of heating of solar cables
Causes and consequences of heating of solar cables
The main reasons for the heating of solar cables include the cable conductor resistance not meeting the standard requirements, improper cable selection resulting in too small conductor cross-section, improper cable installation position resulting in dense arrangement, poor joint quality resulting in excessive contact resistance, poor cable phase insulation performance, and local sheath damage and water ingress resulting in reduced insulation performance.
. Cable conductor resistance not meeting standard requirements: If the resistance of the cable conductor does not meet national or industry standards, the cable will generate heat during normal operation.
. Improper cable selection resulting in too small conductor cross-section: If the cable model or specification used is inappropriate, especially if the conductor cross-section is too small, the cable will be overloaded during operation. After long-term use, the heating and heat dissipation of the cable will be unbalanced, resulting in heating.
. Improper cable installation position resulting in dense arrangement: If the cable is installed too densely, it will affect the ventilation and heat dissipation effect, or the cable is close to other heat sources, which will affect the normal heat dissipation of the cable and cause heating.
. Poor joint quality resulting in excessive contact resistance: If the joint manufacturing technology is not good and the crimping is not tight, the contact resistance at the joint will be too large, which will also cause the cable to generate heat.
.Poor insulation performance between cable phases: If the insulation performance between cables is poor, the insulation resistance is small and cannot meet the design requirements, and heat will be generated during operation.
.Local sheath damage and water ingress lead to reduced insulation performance: After the local sheath of the armored cable is damaged, water ingress will slowly damage the insulation performance, the insulation resistance will gradually decrease, and it will also cause heating during cable operation.
These factors will affect the normal operation and heat dissipation of the cable. If the cause is not found and the fault is not eliminated in time, it may lead to more serious consequences, such as insulation breakdown, phase-to-phase short circuit tripping, and even fire.
Other News
Aug 28,2024
Aluminum solar cable 6mm vs. tinned copper solar cable 4mm: Which one is more suitable?
Aluminum solar cable 6mm is an affordable option and can effectively replace tinned copper solar cable 4mm.
View Detail
Aug 23,2024
6mm solar cable: a reliable guarantee for green energy transmission
he 6mm solar cable not only meets the high requirements of photovoltaic power stations for cable performance, but also fully considers the safety and reliability in long-term operation, bringing lasting value and stable returns to your photovoltaic investment.
View Detail
Aug 22,2024
Causes and consequences of heating of solar cables
The main reasons for the heating of solar cables include the cable conductor resistance not meeting the standard requirements, improper cable selection resulting in too small conductor cross-section
View Detail
Jul 05,2024
VAZPO CABLE to be presented at Solar & Storage Live Vietnam 2024
July 10-11, 2024 — VAZPO CABLE, a leading supplier of photovoltaic cables in China, is excited to announce its participation in Solar & Storage Live Vietnam 2024.
View Detail
We sincerely looking forward to cooperating with you !
Copyright © 2023 Foshan Vazpo New Energy Co., Ltd.
佛山市威之宝新能源有限公司
佛山市南海区桂城街道桂澜北路28号南海万达广场南1栋704A室(住所申报)
Email:vazpom@vazpocable.com
Phone:+86 18038777060